Skip to content

MCERTS Certified Products: Indicative Ambient Particulate Monitors

Overview

MCERTS Certified Products: Indicative Ambient Particulate Monitors

Any potential user should ensure, in consultation with the manufacturer, that the CAMS is suitable for the application. It is important to refer to the details on certificates issued as they may contain specific limitations on use. The certificate holders listed have submitted satisfactory test reports and successfully undergone a product manufacturing audit.

The indicative dust monitoring analysers can be operated in one of two ways:

For qualitative measurements

Providing qualitative measurement data for the analysis of particulate pollution trends, and source identification studies based for example on pollution roses etc. Such application can rely on instrument factory calibration only.

For quantitative measurements

Providing measurement data with the uncertainty defined for indicative instruments (±50%), as specified by the Air Quality Directive (2008). This can be achieved on condition that each instrument used for measurement has been calibrated on the specific site where monitoring is taking place against a standard reference method for a period of two weeks and the resulting slope and intercept have been used for instrument calibration. Using non-standard filters and procedures for this purpose is not acceptable. To maintain the validity of data this calibration has to be repeated at least every twelve months or when the instrument is moved to a different site. Consistent results of the calibration may lead to less frequent repetition of the calibration process, in agreement with a competent authority, such as the Environment Agency or other Environmental regulator.
Issue 23 Updated 24/10/2019
Certificate holderModelCertified rangeCertificate No.

Aeroqual Ltd

Tel: +64 9 623 3013
www.aeroqual.com

Dust Sentry

PM10 0 to 150μg/m3

Version issued:
16/09/2019

Aeroqual Ltd

Tel: +64 9 623 3013
www.aeroqual.com

AQM 65

PM10 0 to 150μg/m3

Version issued:
16/09/2019

MetOne Instruments Inc

www.metone.com
UK Sales (EnviroTechnology
Services plc):
Tel: +44 (0) 1453 733200
www.et.co.uk
[email protected]

E-Sampler Real Time Aerosol Monitor
ES-642 Real Time Aerosol Monitor

PM2.5
PM10
0 to 150μg/m3
0 to 150μg/m3

Version issued:
24/10/2019

TSI Incorporated

UK Sales:
Tel: +44 (0) 149 4 459200
www.tsi.com

Environmental
DustTrakTM Aerosol
Monitor EDTPM10M

PM10 0 to 10, 000 µg/m3

Version issued:
24/10/2019

TSI Incorporated

UK Sales:
Tel: +44 (0) 149 4 459200
www.tsi.com

Environmental DustTrakTM Aerosol
Monitor EDTPM2.5M

PM2.5 0 to 10, 000 µg/m3

Version issued:
24/10/2019

TSI Incorporated

UK Sales:
Tel: +44 (0) 149 4 459200
www.tsi.com

Environmental
DustTrakTM Aerosol
Monitor EDTDRXM

PM2.5
PM10
0 to 10, 000 µg/m3
0 to 10, 000 µg/m3

Version issued:
24/10/2019

Turnkey Instruments Ltd

Tel: +44(0)1606 330020

www.turnkey-instruments.com

Osiris
Airborne Particulate
Monitor

PM10 0 to 100μg/m3

Version issued:
30/09/2019

Turnkey Instruments Ltd

Tel: +44(0)1606 330020

www.turnkey-instruments.com

Topas
Airborne Particulate
Monitor

PM10 0 to 100 µg/m3

Version issued:
30/09/2019

Contact an Expert

Get in Touch

Find out more about what CSA Group can do for you, or request a quote.

Request a Quote Contact Us